{"id":12078187204,"title":"BBK Performance - 1822 - Ford - 3.7L - Power Plus Series - Throttle Body","handle":"bbk-performance-1822-ford-3-7l-power-plus-series-throttle-body","description":"\u003cp\u003eBBK Performance - 1822 - Ford - 3.7L - Power Plus Series - Throttle Body\u003c\/p\u003e\n\u003cp\u003eImproved Power and Throttle Response\u003cbr\u003eThis BBK 73mm throttle body for 2011-2017 Mustang V6 Boss or 2011-2016 F-Series 3.7L V6 and 3.5L EcoBooost will significantly increase horsepower output and throttle response. This BBK 73mm Mustang V6 throttle body will deliver more horsepower and works with both OEM air intakes and aftermarket cold air intakes and intake manifolds to ensure perfect fit and excellent performance.\u003cbr\u003e\u003cbr\u003eHigh Quality Construction\u003cbr\u003eBBK 73mm Mustang\/F150 throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect fit. Features new injection molded plastic gear assemblies and motor for this modern drive by wire application.\u003cbr\u003e\u003cbr\u003eEasy Installation\u003cbr\u003eThis throttle body comes complete with all required hardware for an easy install on your V6 Mustang or F150 right out of the box. Though it has a significantly larger inner bore diameter, the outside is only a tiny bit larger than a stock throttle body. This allows you to use any cold air intake designed for your engine or even the factory inlet tubing. We would recommend a cold air intake for best results, as it will ensure adequate airflow to the throttle body. This will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.\u003cbr\u003e\u003cbr\u003eTuning\u003cbr\u003eBBK engineers have designed our electronic throttle control performance throttle bodies to work in most cases with a factory tune, however depending on other modifications and ECM sensitivity on your specific application a tune is sometimes recommended. This is true with most other brand aftermarket performance throttle bodies as well. While it's not normally required, a tune will not only allow the vehicle to work with certain aftermarket add ons but will also improve overall performance.\u003c\/p\u003e\n\u003cp\u003eEmissions Information\u003cbr\u003eThis part is C.A.R.B Approved. EO Number Is D-245-17 \u003cbr\u003eIt is Legal For use on the following applications in ALL 50 States: 2011-2014 Ford Mustang V6 3.7L applications.\u003cbr\u003eThis part is also CARB Approved D-245-24 for the Following applications:\u003cbr\u003e\u003cbr\u003e2011-2014 Ford F150 3.5L\u003cbr\u003e2015-2018 Ford F150 \/ Expedition \/ Navigator 3.5L\u003cbr\u003e2013-2018 Ford Explorer 3.5L\u003cbr\u003e2010-2018 Ford Flex \/ Taurus 3.5L\u003cbr\u003e2016-2018 Ford Edge 3.5L\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy 8-12 Horsepower Gain\u003c\/li\u003e\n\u003cli\u003eLarge 73mm Throttle Bore\u003c\/li\u003e\n\u003cli\u003eIncreased Horsepower and Quicker Throttle Response\u003c\/li\u003e\n\u003cli\u003eDurable CNC Machined Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eWorks with OEM and Aftermarket Intakes\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On for Easy Installation (2017 F150 Requires Modification)\u003c\/li\u003e\n\u003cli\u003eFitment 2011-2017 Mustang 3.7L TI-VCT V6\u003c\/li\u003e\n\u003cli\u003e2011-2014 Ford F150 3.7L TI-VCT V6\u003c\/li\u003e\n\u003cli\u003e2015-2016 Ford F150 3.5L TI-VCT V6\u003c\/li\u003e\n\u003cli\u003eThis will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2017-10-10T22:04:24-05:00","created_at":"2017-10-10T22:04:24-05:00","vendor":"BBK Performance","type":"BBK Performance Throttle Body","tags":["Ford","Ford 3.7L","Ford EcoBoost 3.5L"],"price":44999,"price_min":44999,"price_max":44999,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":52643661252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1822","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"BBK Performance - 1822 - Ford - 3.7L - Power Plus Series - Throttle Body","public_title":null,"options":["Default Title"],"price":44999,"weight":2268,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":"197975018229"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2246\/1445\/products\/1822_1_1.jpg?v=1557380913"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2246\/1445\/products\/1822_1_1.jpg?v=1557380913","options":["Title"],"content":"\u003cp\u003eBBK Performance - 1822 - Ford - 3.7L - Power Plus Series - Throttle Body\u003c\/p\u003e\n\u003cp\u003eImproved Power and Throttle Response\u003cbr\u003eThis BBK 73mm throttle body for 2011-2017 Mustang V6 Boss or 2011-2016 F-Series 3.7L V6 and 3.5L EcoBooost will significantly increase horsepower output and throttle response. This BBK 73mm Mustang V6 throttle body will deliver more horsepower and works with both OEM air intakes and aftermarket cold air intakes and intake manifolds to ensure perfect fit and excellent performance.\u003cbr\u003e\u003cbr\u003eHigh Quality Construction\u003cbr\u003eBBK 73mm Mustang\/F150 throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect fit. Features new injection molded plastic gear assemblies and motor for this modern drive by wire application.\u003cbr\u003e\u003cbr\u003eEasy Installation\u003cbr\u003eThis throttle body comes complete with all required hardware for an easy install on your V6 Mustang or F150 right out of the box. Though it has a significantly larger inner bore diameter, the outside is only a tiny bit larger than a stock throttle body. This allows you to use any cold air intake designed for your engine or even the factory inlet tubing. We would recommend a cold air intake for best results, as it will ensure adequate airflow to the throttle body. This will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.\u003cbr\u003e\u003cbr\u003eTuning\u003cbr\u003eBBK engineers have designed our electronic throttle control performance throttle bodies to work in most cases with a factory tune, however depending on other modifications and ECM sensitivity on your specific application a tune is sometimes recommended. This is true with most other brand aftermarket performance throttle bodies as well. While it's not normally required, a tune will not only allow the vehicle to work with certain aftermarket add ons but will also improve overall performance.\u003c\/p\u003e\n\u003cp\u003eEmissions Information\u003cbr\u003eThis part is C.A.R.B Approved. EO Number Is D-245-17 \u003cbr\u003eIt is Legal For use on the following applications in ALL 50 States: 2011-2014 Ford Mustang V6 3.7L applications.\u003cbr\u003eThis part is also CARB Approved D-245-24 for the Following applications:\u003cbr\u003e\u003cbr\u003e2011-2014 Ford F150 3.5L\u003cbr\u003e2015-2018 Ford F150 \/ Expedition \/ Navigator 3.5L\u003cbr\u003e2013-2018 Ford Explorer 3.5L\u003cbr\u003e2010-2018 Ford Flex \/ Taurus 3.5L\u003cbr\u003e2016-2018 Ford Edge 3.5L\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy 8-12 Horsepower Gain\u003c\/li\u003e\n\u003cli\u003eLarge 73mm Throttle Bore\u003c\/li\u003e\n\u003cli\u003eIncreased Horsepower and Quicker Throttle Response\u003c\/li\u003e\n\u003cli\u003eDurable CNC Machined Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eWorks with OEM and Aftermarket Intakes\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-On for Easy Installation (2017 F150 Requires Modification)\u003c\/li\u003e\n\u003cli\u003eFitment 2011-2017 Mustang 3.7L TI-VCT V6\u003c\/li\u003e\n\u003cli\u003e2011-2014 Ford F150 3.7L TI-VCT V6\u003c\/li\u003e\n\u003cli\u003e2015-2016 Ford F150 3.5L TI-VCT V6\u003c\/li\u003e\n\u003cli\u003eThis will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.\u003c\/li\u003e\n\u003c\/ul\u003e"}

BBK Performance - 1822 - Ford - 3.7L - Power Plus Series - Throttle Body

Product Description
$449.99
Maximum quantity available reached.

BBK Performance - 1822 - Ford - 3.7L - Power Plus Series - Throttle Body

Improved Power and Throttle Response
This BBK 73mm throttle body for 2011-2017 Mustang V6 Boss or 2011-2016 F-Series 3.7L V6 and 3.5L EcoBooost will significantly increase horsepower output and throttle response. This BBK 73mm Mustang V6 throttle body will deliver more horsepower and works with both OEM air intakes and aftermarket cold air intakes and intake manifolds to ensure perfect fit and excellent performance.

High Quality Construction
BBK 73mm Mustang/F150 throttle bodies are CNC machined from high quality 356 aluminum castings to ensure perfect fit. Features new injection molded plastic gear assemblies and motor for this modern drive by wire application.

Easy Installation
This throttle body comes complete with all required hardware for an easy install on your V6 Mustang or F150 right out of the box. Though it has a significantly larger inner bore diameter, the outside is only a tiny bit larger than a stock throttle body. This allows you to use any cold air intake designed for your engine or even the factory inlet tubing. We would recommend a cold air intake for best results, as it will ensure adequate airflow to the throttle body. This will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.

Tuning
BBK engineers have designed our electronic throttle control performance throttle bodies to work in most cases with a factory tune, however depending on other modifications and ECM sensitivity on your specific application a tune is sometimes recommended. This is true with most other brand aftermarket performance throttle bodies as well. While it's not normally required, a tune will not only allow the vehicle to work with certain aftermarket add ons but will also improve overall performance.

Emissions Information
This part is C.A.R.B Approved. EO Number Is D-245-17
It is Legal For use on the following applications in ALL 50 States: 2011-2014 Ford Mustang V6 3.7L applications.
This part is also CARB Approved D-245-24 for the Following applications:

2011-2014 Ford F150 3.5L
2015-2018 Ford F150 / Expedition / Navigator 3.5L
2013-2018 Ford Explorer 3.5L
2010-2018 Ford Flex / Taurus 3.5L
2016-2018 Ford Edge 3.5L

  • Easy 8-12 Horsepower Gain
  • Large 73mm Throttle Bore
  • Increased Horsepower and Quicker Throttle Response
  • Durable CNC Machined Aluminum Construction
  • Works with OEM and Aftermarket Intakes
  • Direct Bolt-On for Easy Installation (2017 F150 Requires Modification)
  • Fitment 2011-2017 Mustang 3.7L TI-VCT V6
  • 2011-2014 Ford F150 3.7L TI-VCT V6
  • 2015-2016 Ford F150 3.5L TI-VCT V6
  • This will not fit 2017 F150 3.5 Eco Boost Application without Modification. On 2017+ models the connector is located facing passenger side. Requires extending the OEM wire harness for fitment.
Sku: 1822

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)